Vnet cung cap cac sp nhu GPS Module, GPS Antenna, GSM Antenna...

Trang nhất » Sản phẩm » Remote Terminal Unit

F2X64 Industrial Wireless RTU

Mã sản phẩm: F2X64 - 1124 Lượt xem
1 2 3 4 5 0 điểm
Đặt hàng

Giá gốc : ~0 VND


Số lượng:

OVERVIEW

F2X64 3G industrial wireless RTU is a fully functional, excellent performance  wireless remote terminal unit. Integrated industrial RTU and 3G IP MODEM functions, Including analog input, switch input, switch output (relay output, Opticalcoupler isolation output), interface isolation protection, pulse counting, SMS alarm, data connection broken backup and 2.5G /3G transparent data transmission tunnel, ZigBee short distance wireless communication, GPS positioning, etc,It is the best choice of wireless acquisition, transmission, monitoring and control systems.
 
F2X64 3G industrial wireless RTU can easily be used for water level gauge, rain gauge, flowmeter, pulse water meter, liquid level transmitter, pressure transmitter, temperature transmitter, current transducer, voltage transducer, and other intelligent instruments, realize data acquisition, transmission ,measurement and control.


  RTU
APPLICATION (Design for Industrial Application)
1. High-powered industrial cellular module
2. High-powered industrial 32 bits CPU
3. Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
4. Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
5. Housing: iron, providing IP30 protection.
6. Power range: DC 5~35V


STABILITY & RELIABILITY
1. Support hardware and software WDT
2. Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
3. RS232/RS485/RS422 port: 15KV ESD protection
4. SIM/UIM port: 15KV ESD protection
5. Power port: reverse-voltage and overvoltage protection
6. Antenna port: lightning protection(optional)


STANDARD & CONVENIENCE
1. Adopt terminal block interface, convenient for industrial application
2. Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
3. TTL logic level RS232 interface can be customized
4. Support intellectual mode, enter into communication state automatically when powered
5. Provide management software for remote management
6. Support several work modes
7. Convenient configuration and maintenance interface


HIGH-PERFORMANGE
1.  8 ch acquisition analog input(resolution:16bit)Input voltage(0-5V),Input current(0-20mA), Sampling rate(1.365kSPS) ,Accuracy ±0.5% or better
2.  4 ch relay output(5A/30VDC,5A/250VAC)
3.  4 ch optocoupler isolation output,open collector to 30V,40mA max.load,power consumption 125mW
4.  8 ch Digital input(“0”:0-3.3V,“1”:5-24V). Contains all the way count function
5.   2MB SPI FLASH
6.   Support dual data centers, one main and another as backup
7.   Support multiple data centers , it can support  maximum 5 data centers
8.   Support multi-center multi-function(for example: one data center is MODBUS RTU protocol function, another data center is RTU extended protocol function)
9.   Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout
10. Support dynamic domain name(DDNS) and IP access to the data center
11. Support RS232/RS485 MODBUS RTU protocol
12. Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to virtual serial port
13. Support 8 digital inputs and 8 analog input manual query and automatic report
14. Support 4 optocoupler isolated output ports and 4  relay outputs controlled via MODBUS RTU protocol
15. Support pulse counter initiate value configurable, Its realtime value can be queried via MODBUS RTU protocol
16. Support RTU extended protocol.
17. Acquisition data(8 analog inputs and 8 digital inputs) is reported periodically via RTU extended RTU protocal.
18. Support RTU extended protocol. Reporting mode can be selected. there are three reporting mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when network connect fail)
19. Support RTU extended protocol.When reporting acquisition data failure, acquisition data are saved to 2M byte SPI FALSH
20. Support RTU extended protocol. The data center can query acquisition data actively
21. Support RTU extended protocol. It has counter function that the initial value of the timer is set and the value of the timer is queried
22. Support RTU extended protocol. It has the data center and RS232/RS485 transparent transmission function
23. Support RTU extended protocol. it has alarm function, alarm information is reported automatically(alarm trigger conditions can be configured independently).
24. Support RTU extended protocol. Can remotely reboot RTU
25. Support RTU extended protocol. Can remotely configure the parameters
26. Support RTU extended protocol. The remote upgrading parameters can be configured, RTU support remote upgrade firmware.
27. Alarm function: Alarm information are reported through RTU extended protocol , SMS, or both SMS and RTU extended protocol
28. When alarm information are reported through SMS, alarm number and alarm content of each channel can be configured independently
29. The remote upgrading parameters can be configured by SMS. RTU upgrade the firmware immediately when it received the upgrade command.
30. Built-in industrial clock, the acquisition time can be recorded through this clock
31. Network is automatically connected, when device power on. Network is automatically reconnected when network is offline.
32. Scheduled turn on and turn off power function make the device work in low-power mode

CELLULAR SPECIFICATION
Standard and Band Bandwidth TX power RX sensitivity
F7930 GPS+GPRS/CDMA ROUTER
GPRS:
EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional)
Compliant to GSM phase 2/2+
GPRS class 10, class 12(optional)
 
85.6Kbps
 
GSM850/900:<33dBm
GSM1800/1900:<30dBm
 
<-107
dBm
CDMA:
CDMA2000 1xRTT 800MHz
800/1900MHz(optional)
450MHz(optional)
 
153.6Kbps
 
<30dBm
 
<-104
dBm
F7931 GPS+EVDO/EVDO ROUTER
CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional)
450MHz (optional)
CDMA2000 1X RTT, IS-95 A/B
Download speed:3.1Mbps
Upload speed:1.8Mbps
<23dBm <-104
dBm
F7932 GPS+WCDMA/WCDMA ROUTER
UMTS/WCDMA/HSDPA/HSUPA 850/1900/2100MHz, 850/900/1900/2100MHz(optional)
GSM850/900/1800/1900MHz
GPRS/EDGE CLASS 12
HSUPA:5.76Mbps
(Upload speed)
 HSDPA:7.2Mbps
(Download speed)
UMTS:384Kbps (DL/UL)
<24dBm <-109
dBm
F7933 GPS+WCDMA/EVDO ROUTER
WCDMA:
UMTS/WCDMA/HSDPA/HSUPA 850/1900/2100MHz, 850/900/1900/2100MHz(optional)
GSM850/900/1800/1900MHz
GPRS/EDGE CLASS 12
 
HSUPA:5.76Mbps
(Upload speed)
 HSDPA:7.2Mbps
(Download speed)
UMTS:384Kbps (DL/UL)
 
<24dBm
 
<-109
dBm
EVDO:
CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional)
450MHz (optional)
CDMA2000 1X RTT, IS-95 A/B
 
Download speed:3.1Mbps
Upload speed:1.8Mbps
 
<23dBm
 
<-104
dBm

GPS SPECIFICATION
Item Content
GPS Module Industrial GPS module
Receiver Type 50-channle
GPS L1(1575.42MHz)C/A code
SBAS: WAAS,EGNOS,MSAS,GAGAN
Support GALILEO
Max. update rate 4 Hz
Accuracy Position: 2.5m CPE
SBAS: 2.0m CPE
Acquisition Cold starts: 29S
Warm starts: 29S
Aided starts: <1S
Hot starts: <1S
Sensitivity Tracking: -160dBm
Reacquisition: -160dBm
Cold starts: -144dBm
Timing accuracy RMS: 30ns
99%: <60ns
Granularity: 21ns
Time pulse Configurable, 0.25 to 1000Hz

HARDWARE SYSTEM
Item Content
CPU Industrial 32bits CPU
FLASH 4MB(Extendable to 16MB)
SDRAM 32MB(Extendable to 64MB)

INTERFACE TYPE
Item Content
WAN 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator "Power", "System", "Online-1", "Online-2", " Local Network ", "WAN", "GPS"
Antenna Cellular: 2 standard SMA female interfaces, 50 ohm, lighting protection(optional)
GPS: standard SMA female interfaces, 50 ohm, lighting protection(optional)
SIM/UIM 2 standard 3V/1.8V user card interfaces, 15KV ESD protection
Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection
Reset Restore the router to its original factory default settings

POWER INPUT
Item Content
Standard Power DC 12V/1.5A
Power Range DC 5~35V
Consumption <500mA (12V)

PHYSICAL CHARACTERISTICS
Item Content
Housing Iron, providing IP30 protection
Dimensions 206x135x28 mm
Weight 805g

ENVIRONMENTAL LIMITS
Item Content
Operating Temperature -25~+65ºC(-13~+149℉)
Extended  Operating Temperature -30~+75ºC(-22~+167℉)
Storage Temperature -40~+85ºC(-40~+185℉)
Operating Humidity 95% ( Non-condensing)

LIÊN HỆ

Skype: lieubv_bkhn
Mr Khanh: 0932.238.155
 
info@vn-et.com
 

Nếu bạn có bất kì vấn đề gì xin vui lòng liên hệ với chúng tôi.

Hướng dẫn mua hàng từ E2C.VN
how to buy from uobd2
Số ký tự được gõ là 250
 
Gửi email để cập nhật thông tin mới nhất
Holux Skylab U-box Gotop Royaltek Simcom Neoway Quectel Cinterion Huawei Jinchang Jinan URS IOT Vnettek Mouser Telit Four-faith Siemens Wavecom Bailingjia